To Next Page

To Previous Page

Automatic Transmission: 5A-21

• Install the clutch shoe (3) onto the clutch housing and

turn the clutch shoe by hand to inspect the one way

clutch for a smooth movement. The clutch shoe turns

one direction only. If a large resistance is felt to

rotation, inspect the one way clutch for damage or one

way clutch contacting surface of the clutch shoe for

wear or damage. If any defects are found, replace

them with new ones.

Movable Drive Face Cover Disassembly and

Assembly

B931H25106014

Disassembly

• Remove the oil seal (1) with the special tool.

Special tool

(A): 09913–50121 (Oil seal remover)

• Remove the snap ring (2).

• Remove the bearing (3) with the special tool.

NOTE

If there is no abnormal noise, the bearing

removal is not necessary.

Special tool

(B): 09913–70210 (Bearing installer set (10 –

75))

Assembly

• Press the bearing (1) with the special tool.

Special tool

(A): 09913–70210 (Bearing installer set (10 –

75))

CAUTION

The sealed cover of the bearing must face

outside.

I831G1510089-01

(A)

I931H1510083-01

I931H1510084-01

(B)

I931H1510085-01

(A)

I931H1510086-01

Suzuki kq500 User Manual

Questions and Answers: