1D-15 Engine Mechanical:
13) Disconnect the generator coupler (10), CKP sensor
coupler (11) and gear position sensor coupler (12).
14) Remove the V-belt cooling ducts. Refer to “V-belt
Cooling Duct Removal and Installation in Section 5A
(Page 5A-5)”.
15) Remove the muffler and exhaust pipes. Refer to
“Exhaust Pipe / Muffler Removal and Installation in
Section 1K (Page 1K-2)”.
16) Remove the rear brake cable clamp bolt (13).
17) Remove the right footrest (14).
18) Remove the rear brake pedal. Refer to “Rear Brake
Pedal Removal and Installation in Section 4A
(Page 4A-14)”.
19) Remove the rear propeller shaft (15). Refer to “Rear
Propeller Shaft Removal and Installation in Section
3D (Page 3D-17)”.
20) Remove the front differential mounting bolts and
slide the front differential assembly (16) forward.
Refer to “Front Drive (Differential) Assembly
Removal and Installation in Section 3B (Page 3B-4)”.
21) Remove the front propeller shaft (17) and spring
(18).
22) Remove the dumper stopper (20) by removing the
mounting bolts.
10
11
12
I831G1140060-02
14
13
I831G1140061-02
I831G1140062-01
15
I831G1140063-03
16
17
18
I831G1140064-02
20
I831G1140065-02
To Next Page
Loading...
