Suzuki LT-A750X/P - Tightening Torque Specifications; Special Tools and Equipment; Recommended Service Material; Special Tool

4B-9 Front Brakes:
Tightening Torque Specifications
B831G24207002
NOTE
The specified tightening torque is also described in the following.
“Front Brake Components (Page 4B-1)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List in Section 0C
(Page 0C-7)”.
Special Tools and Equipment
Recommended Service Material
B831G24208001
NOTE
Required service material is also described in the following.
“Front Brake Components (Page 4B-1)”
Special Tool
B831G24208002
Fastening part
Tightening torque
Note
N⋅mkgf-mlb-ft
Front brake pad mounting pin 18 1.8 13.0 )(Page 4B-3)
Brake caliper mounting bolt 26 2.6 19.0 )(Page 4B-3)
Front brake hose union bolt
23 2.3 16.5
)(Page 4B-4) /
)(Page 4B-6)
Caliper holder slide pin 23 2.3 16.5 )(Page 4B-5)
Caliper holder pin 18 1.8 13.0 )(Page 4B-5)
Brake disc bolt 23 2.3 16.5 )(Page 4B-7)
Material SUZUKI recommended product or Specification Note
Brake fluid DOT 4 — )(Page 4B-5) / )(Page 4B-
5)
Grease SUZUKI SILICONE GREASE or
equivalent
P/No.: 99000–25100 )(Page 4B-6)
Thread lock cement THREAD LOCK CEMENT SUPER
1303 or equivalent
P/No.: 99000–32030 )(Page 4B-3) / )(Page 4B-
5)
THREAD LOCK CEMENT 1342 or
equivalent
P/No.: 99000–32050 )(Page 4B-3)
THREAD LOCK CEMENT SUPER
1360 or equivalent
P/No.: 99000–32130 )(Page 4B-7)
09900–20205 09900–20607
Micrometer (0 – 25 mm) Dial gauge (1/100 mm, 10
mm)
)(Page 4B-8) )(Page 4B-8)
09900–20701
Magnetic stand
)(Page 4B-8)