Suzuki LT-A750X/P - Movable Drive Face Disassembly and Assembly

Automatic Transmission: 5A-9
V-belt Outer Cover
• Install the V-belt outer cover (1).
CAUTION
!
If there are wear or damage, replace the
gasket (2) with a new one.
• Tighten the V-belt outer cover bolts to the specified
torque.
Tightening torque
V-belt outer cover bolt (a): 8 N·m (0.8 kgf-m, 6.0
lb-ft)
Movable Drive Face Disassembly and Assembly
B831G25106006
Refer to “Automatic Transmission Components
(Page 5A-3)” and “V-belt Type Continuously Variable
Automatic Transmission Removal and Installation
(Page 5A-5)”.
Disassembly
1) Remove the spacer (1).
2) Remove the movable drive plate (2) and rollers (3).
3) Remove the dampers (4).
4) Remove the oil seals (5) and (6).
NOTE
If there are no abnormal conditions, the oil
seals removal are not necessary.
1
2
I831G1510023-01
(a)
I831G1510111-02
1
I831G1510024-01
2
3
I831G1510025-01
4
4
4
I831G1510026-01
5
6
I831G1510027-01