Automatic Transmission: 5A-15
Movable / Fixed Drive Face Parts Inspection
B831G25106009
Movable / Fixed Drive Face
Inspect the drive faces for any abnormal conditions such
as stepped wear or discoloration caused by burning.
If any damages are found, replace the drive faces with
new ones.
Roller
Inspect each roller and their sliding surface for wear or
damage.
If any defects are found, replace the rollers as a set.
NOTE
The rollers must always be changed as a set.
Damper
Inspect the dampers for wear or damage.
If any defects are found, replace the dampers with new
ones.
Oil Seal
Inspect the lip of the oil seal for wear or damage.
If any damages are found, replace the oil seal with a new
one.
Refer to “Movable Driven Face Disassembly and
Assembly (Page 5A-11)”.
Movable / Fixed Driven Face Parts Inspection
B831G25106010
Movable / Fixed Driven Face
Inspect the driven face for any abnormal conditions,
such as stepped wear or discoloration caused by
burning.
If any defects are found, replace them with new ones.
Movable Driven Pin and Spacer
Inspect the movable driven pin and spacer for abnormal
wear or damage. If any defects are found, replace the
pin and spacer with a new one.
I831G1510053-01
I831G1510054-01
I831G1510055-01
I831G1510056-01
I831G1510057-01
I831G1510058-01
To Next Page
Loading...
