Engine Cooling System: 1F-8
Radiator Reservoir Tank Removal and
Installation
B831G21606007
Removal
1) Remove the right inner fender. Refer to “Front Side
Exterior Parts Removal and Installation in Section
9D (Page 9D-6)”.
2) Remove the reservoir tank mounting bolts.
3) Disconnect the hoses (1) and drain the engine
coolant.
4) Remove the reservoir tank (2).
Installation
Install radiator reservoir tank in the reverse order of
removal. Pay attention to the following points:
• Connect the radiator reservoir tank hoses securely.
Refer to “Water Hose Routing Diagram (Page 1F-3)”.
• Fill the reservoir tank to the upper level.
Radiator Reservoir Tank Inspection
B831G21606008
Inspect the radiator reservoir tank cooling leaks. If any
defects are found, replace the radiator reservoir tank
with a new one.
Water Hose Inspection
B831G21606009
Inspect the water hoses in the following procedures:
1) Remove the left side cover (1) and engine side cover
(2).
2) Check the water hoses for crack, damage or engine
coolant leakage. If any defects are found, replace
the radiator hose with a new one.
2
1
I831G1160019-02
To Next Page
Loading...
