EasyManua.ls Logo

Suzuki LT-A750X/P - Tightening Torque Specifications

Suzuki LT-A750X/P
711 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Engine Mechanical: 1D-68
Tightening Torque Specifications
B831G21407002
NOTE
The specified tightening torque is also described in the following.
“Throttle Body Components (Page 1D-7)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List in Section 0C
(Page 0C-7)”.
Fastening part
Tightening torque
Note
Nmkgf-mlb-ft
Air cleaner box mounting bolt 4.5 0.45 3.0 )(Page 1D-6)
TP sensor mounting screw 2 0.2 1.5 )(Page 1D-11)
ISC valve mounting screw 2 0.2 1.5 )(Page 1D-12)
Fuel delivery pipe mounting screw 5 0.5 3.5 )(Page 1D-12)
Engine mounting nut 60 6.0 43.5 )(Page 1D-16)
Engine mounting damper stopper bolt 23 2.3 16.5 )(Page 1D-16)
Footrest mounting bolt (M8) 26 2.6 19.0 )(Page 1D-16)
Footrest mounting bolt (M10) 55 5.5 40.0 )(Page 1D-16)
Cylinder head bolt (L: 200) (Initial) 25 2.5 18.0 )(Page 1D-23)
Cylinder head bolt (L: 200) (Final) 37 3.7 27.0 )(Page 1D-23)
Cylinder head bolt (L: 70) 10 1.0 7.0 )(Page 1D-23)
Cylinder head bolt (L: 100) 10 1.0 7.0 )(Page 1D-23)
Cylinder base nut 10 1.0 7.0 )(Page 1D-24)
Cam drive idle gear/sprocket shaft
41 4.1 29.5
)(Page 1D-25) /
)(Page 1D-40)
Cam chain tension adjuster bolt 10 1.0 7.0 )(Page 1D-25)
Cam chain tension adjuster cap bolt 7 0.7 5.0 )(Page 1D-26)
Camshaft journal holder bolt
10 1.0 7.0
)(Page 1D-26) /
)(Page 1D-29)
Head cover bolt (Initial) 10 1.0 7.0 )(Page 1D-27)
Head cover bolt (Final) 14 1.4 10.0 )(Page 1D-27)
Valve timing inspection plug 23 2.3 16.5 )(Page 1D-27)
Oil gallery plug (Cylinder head) 10 1.0 7.0 )(Page 1D-32)
Intake pipe bolt 9 0.9 6.5 )(Page 1D-33)
Water bypass union 12 1.2 8.5 )(Page 1D-33)
Crankcase bolt (M6) 10 1.0 7.0 )(Page 1D-53)
Crankcase bolt (M8) 26 2.6 19.0 )(Page 1D-53)
Main oil gallery plug 18 1.8 13.0 )(Page 1D-54)
Crank balancer drive gear nut 150 15.0 108.5 )(Page 1D-55)
Crank balancer driven gear bolt 50 5.0 36.0 )(Page 1D-56)
Cam chain tensioner bolt 23 2.3 16.5 )
(Page 1D-56)
S
t
arter cup nut 38 3.8 27.5 )(Page 1D-59)
Water pump mounting bolt 10 1.0 7.0 )(Page 1D-59)
Speed sensor bolt 10 1.0 7.0 )(Page 1D-64)

Table of Contents

Related product manuals