2B-15 Front Suspension:
Specifications
Service Data
B831G22207001
Suspension
Tightening Torque Specifications
B831G22207002
NOTE
The specified tightening torque is also described in the following.
“Front Suspension Components (Page 2B-1)”
“Front Suspension Assembly Construction (Page 2B-2)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List in Section 0C
(Page 0C-7)”.
Special Tools and Equipment
Recommended Service Material
B831G22208001
NOTE
Required service material is also described in the following.
“Front Suspension Components (Page 2B-1)”
“Front Suspension Assembly Construction (Page 2B-2)”
Item Standard Limit
Front shock absorber spring adjustor 2/5 position —
Fastening part
Tightening torque
Note
N⋅mkgf-mlb-ft
Front shock absorber mounting bolt (Upper) 55 5.5 40.0 )(Page 2B-3)
Front shock absorber mounting nut (Lower) 60 6.0 43.5 )(Page 2B-3)
Steering knuckle end nut 29 2.9 21.0 )(Page 2B-5)
Tie-rod end nut 29 2.9 21.0 )(Page 2B-6)
Brake disc cover mounting bolt 10 1.0 7.0 )(Page 2B-6)
Front hub nut 110 11.0 79.5 )(Page 2B-7)
Suspension arm pivot nut (Lower) 65 6.5 47.0 )(Page 2B-9)
Suspension arm pivot nut (Upper) 60 6.0 43.5 )(Page 2B-10)
Shock absorber mounting nut 60 6.0 43.5 )(Page 2B-10)
Material SUZUKI recommended product or Specification Note
Grease Water resistance grease P/No.: 99000–25160 )(Page 2B-5) / )(Page 2B-
6) / )(Page 2B-8) /
)(Page 2B-9) / )(Page 2B-
14)
Thread lock cement THREAD LOCK CEMENT SUPER
1303 or equivalent
P/No.: 99000–32030 )(Page 2B-9)
THREAD LOCK CEMENT SUPER
1360 or equivalent
P/No.: 99000–32130 )(Page 2B-6)
To Next Page
Loading...
