1D-25 Engine Mechanical:
CORRECT
INCORRECT
INCORRECT
• Tighten the cam drive idle gear/sprocket shaft (2) to
the specified torque.
Tightening torque
Cam drive idle gear/sprocket shaft (a): 41 N·m (
4.1 kgf-m, 29.5 lb-ft)
Cam Chain Tension Adjuster
• Install the cam chain tension adjuster (1) and tighten
the its mounting bolts to the specified torque.
CAUTION
!
Use a new gasket to prevent oil leakage.
Tightening torque
Cam chain tension adjuster bolt (a): 10 N·m (1.0
kgf-m, 7.0 lb-ft)
“C”: Punched mark “F”: Root of tooth
“D”: Embossed line “G”: Top of tooth
“E”: White paint
“E”
“E”
“F”
“C”
“D”
I831G1140120-03
“C”
“D”
“G”
“E”
“E”
I831G1140121-04
“C”
“D”
“G”
“E”
“E”
I831G1140122-03
(a)
2
I831G1140328-01
(a)
1
I831G1140123-01
To Next Page
Loading...
