Engine Mechanical: 1D-46
Water Pump
Remove the water pump (1).
Starter Cup
1) Remove the starter cup nut (1) with a suitable bar.
2) Remove the starter cup (2).
Generator
Remove the generator component parts (1). Refer to
“Generator Removal and Installation in Section 1J
(Page 1J-4)”.
Starter Torque Limiter / Starter Idle Gear
1) Remove the starter torque limiter (1) with the
washers (2).
2) Remove the starter idle gear (3) and shaft (4).
3) Remove the bushings (5) from the crankcase and
generator cover.
Starter Driven Gear
Remove the key (1) and starter driven gear (2).
1
I831G1140192-01
1
2
I831G1140193-01
1
I831G1140194-01
1
3
4
2
I831G1140196-02
5
5
I831G1140197-01
1
2
I831G1140195-01