Engine Mechanical: 1D-48
3) Remove the pin (4) and washer (5).
4) Remove the oil pump (6).
NOTE
Do not drop the pin (4) and washer (5) into
the crankcase.
Balancer Shaft Drive / Driven Gear
1) Remove the balancer shaft driven gear bolts (1) by
holding the crankshaft with the special tool.
Special tool
: 09924–52460 (Socket (52 mm))
2) Remove the water pump drive gear (2) and oil pump
drive gear (3).
3) Remove the crank balancer shaft driven gears (4).
4) Remove the keys (5).
5) Unlock the crank balancer drive gear nut.
6) Remove the crank balancer drive gear nut (5) with
the special tools.
Special tool
(A): 09924–52460 (Socket (52 mm))
(B): 09920–53740 (Clutch sleeve hub
holder)
: 09920–31020 (Extension handle)
5
6
4
I831G1140209-01
(A)
1
1
I831G1140210-01
2
3
4
I831G1140211-01
5
I831G1140212-01
I831G1140213-02
(A)
(B)
5
I831G1140214-01
To Next Page
Loading...
