Suzuki LT-A750X/P - Page 213

Engine Mechanical: 1D-62
3) Remove the other bearings (2) with the special tool.
Special tool
(B): 09913–70210 (Bearing installer set)
Right crankcase
1) Remove the bearing retainers.
2) Remove the oil seal (1) with the special tool.
Special tool
(A): 09913–50121 (Oil seal remover)
3) Remove the each bearing (2) with the special tool.
Special tool
(B): 09921–20240 (Bearing remover set)
4) Remove the front output shaft bearing (3) with the
special tools.
Special tool
(C): 09923–74511 (Bearing remover)
(D): 09930–30104 (Rotor remover slide
shaft)
5) Remove the crankshaft bearing (4) with the special
tools.
Special tool
(D): 09930–30104 (Rotor remover slide
shaft)
(E): 09941–64511 (Bearing remover)
2
2
2
2
(B)
I831G1140304-01
I831G1140305-01
(A)
1
I831G1140306-01
2
2
(B)
1
I831G1140307-03
(C)
(D)
3
I831G1140308-01
4
(E)
(D)
I831G1140309-01