1F-15 Engine Cooling System:
4) Remove the pin (7) and washer (8).
5) Remove the impeller (9).
6) Remove the mechanical seal ring (10) and rubber
seal (11) from the impeller.
7) Remove the mechanical seal with the special tool.
NOTE
If there is no abnormal condition, the
mechanical seal removal is not necessary.
Special tool
(A): 09921–20240 (Bearing remover set)
8) Remove the oil seal (12).
NOTE
If there is no abnormal condition, the oil seal
removal is not necessary.
7
8
I831G1160040-02
9
I831G1160041-01
11
10
I831G1160042-01
(A)
I831G1160043-01
12
I831G1160044-01
To Next Page
Loading...
