1G-11 Fuel System:
4) Disconnect the injector coupler (2).
5) Remove the fuel delivery pipe (3) with the injector
(4).
6) Remove the fuel injector (4) from the fuel delivery
pipe.
Installation
Install the fuel injector / fuel delivery pipe in the reverse
order of removal.
Pay attention to the following points:
• Apply a thin coat of engine oil to the new cushion seal
(1) and O-ring (2).
CAUTION
!
Replace the cushion seal and O-ring with the
new ones.
• Install the fuel injector (3) by pushing it straight to the
delivery pipe (4).
CAUTION
!
Never turn the injector while pushing it.
NOTE
Align the coupler “A” of injector with boss
“B” of the delivery pipe.
2
1
I831G1170023-01
4
3
I831G1170024-01
4
I831G1170025-02
1
2
I831G1170026-01
“B”
“A”
3
4
I831G1170027-01
To Next Page
Loading...
