Suzuki LT-A750X/P - Page 339

Rear Suspension: 2C-10
Lower Arm
1) Inspect the following parts for wear or damage. If any
defects are found, replace defective parts with new
ones.
• Suspension lower arm (1)
• Dust seal (2)
•Washer (3)
• Spacer (4)
2) Insert the spacer into bushings.
3) Check the play by moving the spacer up and down. If
excessive play is noted, replace the bushings with a
new one. Refer to “Rear Suspension Lower Arm
Bushing Removal and Installation (Page 2C-12)”.
Suspension Knuckle
1) Inspect the following parts for wear or damage. If any
defects are found, replace defective parts with new
ones.
• Suspension knuckle (1)
• Dust seal (2)
• Washer (3)
• Spacer (4)
2) Insert the spacer into bushings.
3) Check the play by moving the spacer up and down. If
excessive play is noted, replace the bushings with a
new one. Refer to “Rear Suspension Upper Arm
Bushing Removal and Installation (Page 2C-11)”.
1
2
2
2
3
4
4
3
I831G1230034-01
I831G1230035-02
3
3
3
3
4
1
4
2
2
2
I831G1230036-02
I831G1230037-02