Suzuki LT-A750X/P - Page 366

3B-6 Differential:
4) Align the concave part of 2WD/4WD shifting cam
and convex part of diff-lock shift fork.
5) Remove the front drive (differential) gear assembly
(2), diff-lock shifting fork (3) and shifting fork shaft
(4).
6) Remove the shims from the housing and cover.
7) Remove the snap ring (5).
Special tool
: 09900–06108 (Snap ring pliers)
8) Remove the 2WD/4WD shifting cam (6).
9) Remove the oil seals.
Special tool
(B): 09913–70210 (Bearing installer set)
10) Remove the snap ring (7).
Special tool
: 09900–06108 (Snap ring pliers)
11) Remove the 2WD/4WD shifting cam bearing with the
special tool.
NOTE
If there is no abnormal noise, the bearing
removal is not necessary.
Special tool
(C): 09921–20240 (Bearing remover set)
12) Remove 2WD/4WD gear shifting fork shaft (8) and
4WD/diff-lock shifting fork (9).
2
3
4
I831G1320011-02
I831G1320012-01
5
6
I831G1320013-01
(B)
(B)
I831G1320014-01
7
(C)
I831G1320015-02
8
9
I831G1320016-01