Suzuki LT-A750X/P - Page 370

3B-10 Differential:
12) Apply front differential gear oil to the 2WD/4WD
sifting fork shaft (9).
13) Install the left and right side shims into the case
cover and case.
14) Install the 2WD/4WD sifting cam bearing (10) with
special tool.
Special tool
(A): 09913–70210 (Bearing installer set)
15) Install the snap ring (11).
Special tool
: 09900–06108 (Snap ring pliers)
16) Install the oil seals (12) into the front drive
(differential) gear case cover with the special tool.
NOTE
Insert the oil seal until the specified value as
shown in the figure.
Special tool
(A): 09913–70210 (Bearing installer set)
17) Install the 2WD/4WD shifting cam (13).
18) Install the snap ring (14).
Special tool
: 09900–06108 (Snap ring pliers)
9
I831G1320033-02
I831G1320034-01
(A)
10
11
I831G1320035-01
“a”: 4 mm (0.1574 in)
“a”: 4 mm (0.1574 in)
12
(A)
“a”
I831G1320036-02
12
(A)
“a”
I831G1320037-02
13
14
I831G1320038-01