Transfer: 3C-5
• Install the transfer output shaft assembly and reverse
idle gear. Refer to “Transfer Components (Page 3C-
2)”.
• Install the gearshift fork (2) and reverse gearshift fork
(3).
NOTE
Identify the shape of the shift forks and
install them properly.
• Install the gearshift cam (4).
• With engaging each fork and to the cam groove, insert
the fork shaft (5).
• Assemble the engine. Refer to “Engine Bottom Side
Assembly in Section 1D (Page 1D-51)”.
• Remount engine assembly. Refer to “Engine
Assembly Installation in Section 1D (Page 1D-16)”
and “Engine Top Side Assembly in Section 1D
(Page 1D-21)”.
2
3
I831G1330016-01
2
3
I831G1330017-01
4
I831G1330018-01
5
I831G1330019-01
To Next Page
Loading...
