Suzuki LT-A750X/P - Page 403

Transfer: 3C-7
3) Remove the low driven gear bushing (3) and select
sliding dog (4).
4) Remove the reverse select spacer (5), reverse gear
(6) and reverse driven gear bushing (7).
5) Remove the lock washer (8).
6) Remove the lock washer (9) by aligning the teeth “A”
of the lock washer with the spline grooves “B”.
7) Remove the high gearshift dog (10) and select
spacer (11).
8) Remove the high driven gear (12) with the wave
washer (13).
9) Remove the high driven gear bushing (14) and
washer (15).
3
4
I831G1330021-01
5
6
7
I831G1330022-01
8
I831G1330023-01
9
“A”
“B”
I831G1330024-02
10
11
I831G1330025-01
12
13
I831G1330026-01
14
15
I831G1330027-02