Propeller Shafts: 3D-21
15) Fit the rear propeller shaft joint boot (9) to the rear
propeller shaft groove.
16) Apply resistance grease (approx. 4 grams) to the
splines of the rear propeller shaft.
: Grease 99000–25160 (Water resistance
grease)
17) Install the rear propeller shaft.
18) Apply grease (approx. 4 grams) to the spline of rear
propeller shaft and propeller shaft spring (10).
: Grease 99000–25160 (Water resistance
grease)
19) Install the rear propeller shaft spring (10).
20) Install the O-ring (11) to the rear propeller shaft joint.
21) Apply grease (approx. 4 grams) to the spline of rear
propeller shaft joint.
: Grease 99000–25160 (Water resistance
grease)
22) Install the rear propeller shaft joint (12).
23) Install the final gear assembly. Refer to “Final Gear
Assembly Removal and Installation in Section 3B
(Page 3B-23)”.
9
I831G1340096-02
I831G1340080-01
10
I831G1340081-03
11
I831G1340082-03
12
I831G1340083-04
To Next Page
Loading...
