4C-4 Rear Brakes:
4) Remove the rear bake cam shaft (6).
5) Unlock the nut with a chisel.
6) Remove the rear drive gear shaft nut (7) with the
special tool and remove the washer (8).
Special tool
(A): 09924–52420 (Secondary bevel gear
holder)
7) Remove the rear drive gear shaft (9), with plastic
mallet.
8) Remove the oil seal (10) with the special tool.
Special tool
(B): 09913–50121 (Oil seal remover)
9) Remove the oil seal (11).
10) Remove the snap ring (12) with the special tool.
Special tool
: 09900–06108 (Snap ring pliers)
6
I831G1430013-01
I831G1430014-01
7
8
(A)
I831G1430015-01
9
I831G1430016-01
10
11
(B)
I831G1430017-01
12
I831G1430018-01
To Next Page
Loading...
