Automatic Transmission: 5A-27
Tightening Torque Specifications
B831G25107002
NOTE
The specified tightening torque is also described in the following.
“Automatic Transmission Components (Page 5A-3)”
“Shift Lever Assembly Components (Page 5A-23)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List in Section 0C
(Page 0C-7)”.
Special Tools and Equipment
Recommended Service Material
B831G25108001
NOTE
Required service material is also described in the following.
“Automatic Transmission Components (Page 5A-3)”
“Shift Lever Assembly Components (Page 5A-23)”
Fastening part
Tightening torque
Note
N⋅mkgf-mlb-ft
Movable driven face bolt 110 11.0 79.5 )(Page 5A-8)
Movable drive face bolt 110 11.0 79.5 )(Page 5A-8)
V-belt outer cover bolt 8 0.8 6.0 )(Page 5A-9)
Movable driven face ring nut 110 11.0 79.5 )(Page 5A-14)
Clutch shoe nut 150 15.0 108.5 )(Page 5A-17)
V-belt inner cover bolt 9 0.9 6.5 )(Page 5A-18)
Material SUZUKI recommended product or Specification Note
Grease SUZUKI SUPER GREASE A or
equivalent
P/No.: 99000–25010 )(Page 5A-7) / )(Page 5A-
10) / )(Page 5A-10) /
)(Page 5A-13) /
)(Page 5A-13) /
)(Page 5A-20) /
)(Page 5A-20) /
)(Page 5A-22) /
)(Page 5A-23) /
)(Page 5A-25)
Molybdenum oil MOLYBDENUM OIL SOLUTION — )(Page 5A-18)
Thread lock cement THREAD LOCK CEMENT SUPER
1303 or equivalent
P/No.: 99000–32030 )(Page 5A-17) /
)(Page 5A-20)
THREAD LOCK CEMENT 1342 or
equivalent
P/No.: 99000–32050 )(Page 5A-25)