9D-8 Exterior Parts:
Inner Fender
Removal
Remove the inner fenders (1) by removing the screw (2),
bolt (3) and fastener (4), left and right.
Installation
Install the inner fenders in the reverse order of removal.
Side Cover
Removal
1) Remove the seat. Refer to “Seat Removal and
Installation (Page 9D-11)”.
2) Remove the side cover (1), left and right.
Installation
Install the side cover in the reverse order of removal.
Front Fender
Removal
1) Remove the front carrier. Refer to “Front Carrier
Removal and Installation in Section 9E (Page 9E-4)”.
2) Remove the seat. Refer to “Seat Removal and
Installation (Page 9D-11)”.
3) Remove the air cleaner box cover, front box, inner
fenders and side covers. Refer to “Front Side
Exterior Parts Removal and Installation (Page 9D-
6)”.
4) Disconnect the power source socket coupler (1).
“A”: Left side
2
I831G1940013-02
4
3
1
I831G1940014-02
1 “A”
I831G1940015-01
“B”: Right side
1
“B”
I831G1940016-01
1
I831G1940017-01
To Next Page
Loading...
