0C-6 Service Data:
Brake + Wheel
Unit: mm (in)
Tire
Unit: mm (in)
Suspension
Unit: mm (in)
Fuel + Oil
Item Standard Limit
Front brake disc thickness — 3.0 (0.12)
Front brake disc runout — 0.30 (0.012)
Front master cylinder bore 14.000 – 14.043 (0.5512 – 0.5529) —
Front master cylinder piston diam. 13.957 – 13.984 (0.5495 – 0.5506) —
Front brake caliper cylinder bore 33.960 – 34.010 (1.3370 – 1.3390) —
Front brake caliper piston diam. 33.878 – 33.928 (1.3338 – 1.3357) —
Rear brake pedal height 12.5 – 22.5 (0.5 – 0.9) —
Rear brake pedal free travel 20 – 30 (0.8 – 1.2) —
Rear brake lever play 6 – 8 (0.2 – 0.3) —
Rear brake outer distance 26.0 – 27.0 (1.02 – 1.06) —
Brake side plate spring free length 21.3 (0.84) 20.2 (0.80)
Brake fluid type DOT 4 —
Steering angle 46° (right & left) —
Turning radius 3.1 m (10.2 ft) —
Toe-out (With 75 kg, 165 lbs) 10 ± 4 mm (0.39 ± 0.16) —
Camber 0.64° —
Caster 1.6° —
Item Standard Limit
Cold inflation tire pressure
(Solo riding)
Front 35 kPa (0.35 kgf/cm
2
, 5.1 psi) —
Rear 30 kPa (0.30 kgf/cm
2
, 4.4 psi) —
Tire size
Front AT25 x 8-12 , tubeless —
Rear AT25 x 10-12 , tubeless —
Tire tread depth
Front — 4.0 (0.16)
Rear — 4.0 (0.16)
Item Standard Limit
Front shock absorber spring
adjustor
2/5 position —
Rear shock absorber spring adjustor 2/5 position —
Item Specification Note
Fuel type
Use only unleaded gasoline of at least 87 pump octane (R/2
+ M/2) or 91 octane or higher rated by the Research
Method. Gasoline containing MTBE (Methyl Tertiary Butyl
Ether), less than 10% ethanol, or less than 5% methanol
with appropriate cosolvents and corrosion inhibitor is
permissible.
P-28, 33
Gasoline used should be graded 91 octane or higher. An
unleaded gasoline type is recommended.
Others
Fuel tank capacity 17.5 L (4.6/3.8 US/lmp gal)
Engine oil type SAE 10 W-40, API SF/SG or SH/SJ with JASO MA
Engine oil capacity
Change 2 300 ml (2.4/2.0 US/lmp qt)
Filter change 2 500 ml (2.6/2.2 US/lmp qt)
Overhaul 3 000 ml (3.2/2.6 US/lmp qt)
To Next Page
Loading...
