6C-45 Power Assisted Steering System:
2 1) Turn the ignition switch OFF.
2) Disconnect the EPS motor coupler.
3) Inspect the continuity of the EPS motor. Refer to “EPS
Motor Inspection (LT-A750XP/ZK9) (Page 6C-53)”.
Is continuity OK?
Replace the EPS
control unit with a
known good one, and
inspect it again. Refer to
“EPS Control Unit
Removal and
Installation (LT-A750XP/
ZK9) (Page 6C-48)”.
Replace the EPS motor
(EPS body assembly)
with a new one. Refer to
“EPS Body Assembly
Removal and
Installation (LT-A750XP/
ZK9) (Page 6C-50)”.
Step Action Yes No
I931G3630038-01
To Next Page
Loading...
