FUEL AND LUBRICATION SYSTEM 4-5
SPECIFICATIONS
I.D. NO. LOCATION
Carburetor has an I.D. number
1 on its body.
REMOVAL
See page 3-4.
ITEM SPECIFICATION
Carburetor type MIKUNI BS26
Bore size 26 mm
I.D. No. 13GA
Idle r/min 1 500 ± 100 r/min
Float height 17.1 ± 1.0 mm
Main jet (M.J.) # 115
Jet needle (J.N.) 4EJ44-2nd
Needle jet (N.J.) P-0M
Throttle valve (Th.V.) # 105
Pilot jet (P.J.) # 15
Pilot screw (P.S.) PRE-SET (2 turns out)
Throttle cable play 2.0 – 4.0 mm
To Next Page
Loading...
