CHASSIS 5-39
• Remove the rear brake cam
6.
• Remove the washer
7 and O-ring
8.
INSPECTION
BRAKE DRUM
Inspect the brake drum and measure the brake drum I.D. to
determine the extent of wear.
Replace the brake drum if the measurement exceeds the ser-
vice limit. The value of this limit is indicated inside the brake
drum.
$ Brake drum I.D.
Service Limit: 110.7 mm
BRAKE SHOES
Check the brake shoe wear and decide whether it should be
replaced or not.
Replace two brake shoes together as a set.
!
BRAKE CAM
Inspect the brake cam for abnormal wear.
Place the brake cam into the brake panel and check for smooth
rotation.
Check that the rotating parts are coated with sufficient grease.
REASSEMBLY
• When installing the brake camshaft, apply SUZUKI SUPER
GREASE to the camshaft, cam face and pin.
% 99000-25010: SUZUKI SUPER GREASE “A”
Replace the brake shoes as a set, otherwise braking
performance will be adversely affected.
To Next Page
Loading...
