Suzuki RV125 - Rear Brake Pedal Removal

5-40 CHASSIS
• Install the brake shoes with spring hooks faced inside.
!
• When installing the brake cam lever, align the groove
A of
camshaft with slit of cam lever.
• Tighten the brake cam lever nut to the specified torque.
' Brake cam lever nut: 7 N·m (0.7 kgf-m)
• Install the rear wheel. (#5-37)
REAR BRAKE PEDAL REMOVAL
• Remove the rear brake adjuster nut
1, pin 2, spring 3 and
washer
4.
• Remove the rear brake light switch spring
5.
• Remove the brake pedal return spring
6.
• Remove the
snap ring 7.
• Remove the brake pedal.
Be careful not to apply too much grease to the cam
and pin. If grease gets on the lining, brake slippage
will result.