5-10 CHASSIS
BRAKE FLUID REPLACEMENT
• Place the motorcycle on a level surface and keep the handle-
bars straight.
• Remove the master cylinder reservoir cap and diaphragm.
• Suck up the old brake fluid as much as possible.
• Connect a clear hose to the air bleeder valve
1 and insert the
other end of the hose into a receptacle.
• Loosen the air bleeder valve and pump the brake lever until
the old brake fluid is completely out of the brake system.
• Close the air bleeder valve and disconnect a clear hose. Fill
the reservoir with new brake fluid to the upper end of the
inspection window.
) Specification and classification: DOT 4
!
* Never reuse the brake fluid left over from previous
servicing and which has been stored for long peri-
ods of time.
* Bleed air from the brake system. (#2-15)
To Next Page
Loading...
