SERVICING INFORMATION 7-17
FUEL TANK INSTALLATION
REAR BRAKE PEDAL INSTALLTAION
Cushion
Cushion
Cushion
Cushion
Spacer
Bolt
Clamp
Gasket
To carburetor
Fuel valve
4.5 N
.
m
(0.45 kgf-m)
Align the cushion concave part
with the frame locating plate.
Install so that the clamp
claw faces downward.
Install so that the clamp
claw faces inward.
Cut the clamp end, so the remaining
part should be more or less 10 mm.
Cotter pin (Bend the cotter
pin and its ends should face
downward.)
Rear brake light switch
Snap ring
Brake pedal height:
Approx. 11 mm
To Next Page
Loading...
