CHASSIS 5-15
MASTER CYLINDER REMOVAL AND
DISASSEMBLY
• Place a rag underneath the brake hose union bolt
1 on the
master cylinder to catch any spilt brake fluid. (# 5-10)
!
• Remove the rear view mirror (right)
2.
• Disconnect the front brake light switch lead wire coupler
3.
• Remove the front brake master cylinder
4.
• Remove the brake switch
5 and brake lever
6.
• Remove the reservoir cap
7 and diaphragm
8.
Immediately wipe off any brake fluid contacting any
part of the motorcycle. The brake fluid reacts chemi-
cally with paint, plastics, rubber materials, etc., and
will damage them severely.
To Next Page
Loading...
