ENGINE 3-45
OIL FILTER
REMOVAL AND INSTALLATION
• Remove the oil filter cap
1.
• Remove the oil filter
2 and install a new one.
NOTE:
Before installing the new oil filter and oil filter cap, make sure
that the spring
3 and new O-rings (
4,
5) are installed cor-
rectly.
• Apply engine oil to the O-rings
4 and
5.
• Install the oil filter cap.
OIL SUMP FILTER
REMOVAL
• Remove the oil sump filter cap
1.
• Remove the oil sump filter
2.
CLEANING AND INSPECTION
Clean the oil sump filter with a compressed air.
Check the oil sump filter for any damage or clogs.
INSTALLATION
• Install the oil sump filter in the reverse order of removal.
"
Replace the O-ring
3 with a new one.
To Next Page
Loading...
