2-20 PERIODIC MAINTENANCE
CHASSIS BOLTS AND NUTS
Check that all chassis bolts and nuts are tightened to their specified torque. (Refer to page 2-21 for the loca-
tions of the following bolts and nuts on the motorcycle.)
Tighten initially at 1 000 km (5 months) and every
4 000 km (20 months) thereafter.
Item N·m kgf-m
1 Handlebar clamp bolt 23 2.3
2 Steering stem head nut 90 9.0
3 Front fork upper clamp bolt 23 2.3
4 Front fork lower clamp bolt 33 3.3
5 Front fork cap bolt 23 2.3
6 Front axle 65 6.5
7 Front axle pinch bolt 23 2.3
8 Front brake caliper mounting bolt 39 3.9
9 Front brake hose union bolt 23 2.3
0 Front brake caliper air bleeder valve 7.5 0.75
A Front brake master cylinder mounting bolt 10 1.0
B Swingarm pivot nut 65 6.5
C Rear axle nut 65 6.5
D Rear shock absorber mounting bolt/nut
(Upper & Lower)
50 5.0
E Front footrest bolt 94 9.4
F Rear brake cam lever nut 7 0.7
G Rear sprocket mounting nut 60 6.0
H Spoke nipple 4.5 0.45
To Next Page
Loading...
