5-36 CHASSIS
REAR SPROCKET
Inspect the rear sprocket teeth for wear.
If they are worn, replace the sprocket and drive chain.
REASSEMBLY AND REMOUNING
Reassemble and remount the rear wheel and rear brake in the
reverse order of removal and disassembly. Pay attention to the
following points:
WHEEL BEARINGS
• Apply SUZUKI SUPER GREASE to the bearings before
installing.
% 99000-25010: SUZUKI SUPER GREASE “A”
• Install the wheel bearings using the special tool.
" 09941-34513: Bearing installer set
!
Normal wear
Excessive wear
* First install the right wheel bearing, then install the
left wheel bearing.
* The sealed cover on the bearing must face out.
To Next Page
Loading...
