Suzuki RV125 - Master Cylinder Inspection; Master Cylinder Reassembly and Remounting

5-16 CHASSIS
• Pull out the dust seal boot
1 and remove the snap ring 2.
• Remove the piston
3 and spring 4.
MASTER CYLINDER INSPECTION
Inspect the master cylinder bore for any scratches or damage. If
any damages are found, replace the master cylinder with a new
one.
MASTER CYLINDER REASSEMBLY AND
REMOUNTING
Reassemble and remount the brake caliper in the reverse order
of removal and disassembly. Pay attention to the following
points:
!
) Specification and classification: DOT 4
* Wash the master cylinder components with new
brake fluid before reassembly.
* Do not wipe the brake fluid off after washing the
components with rag.
* When washing the components, use the specified
brake fluid. Never use different types of fluid or
cleaning solvents such as gasoline, kerosine, etc.
* Apply brake fluid to the master cylinder bore and all
of the master cylinder components before reassem-
bly.