CHASSIS 5-25
• Install the oil seal stopper ring
2 and dust seal
3.
!
DAMPER ROD
• Fit the rebound spring
1 to the damper rod
2 and install
them to the inner tube.
• Fit the gasket
3, coat the damper rod bolt
4 with the thread
lock and tighten the bolt to the specified torque.
' Damper rod bolt: 30 N·m (3.0 kgf-m)
+ 99000-32050: THREAD LOCK “1322”
" 09940-34520: “T” handle
09940-34561: Attachment “D”
!
Make sure that the oil seal stopper ring is fitted
securely.
Use a new damper rod bolt gasket
3 to prevent oil
leakage.
To Next Page
Loading...
