5-30 CHASSIS
• Remove the handlebars
6.
!
• Remove the steering stem head nut
7.
!
• Remove the steering stem nut
8 using the special tool.
• Draw out the steering stem lower bracket
9.
" 09940-14911: Steering stem nut socket wrench
NOTE:
Hold the steering stem bracket by hand to prevent it from falling.
• Remove the dust seal
0 and upper bearing inner race
A.
• Remove the steering stem upper bearing
B.
Protect the removed handlebars with a cloth to pre-
vent it touching other parts directly.
The steering stem head may rotate together and dam-
age the fuel tank. Use a cloth or the like to prevent
such damage.
To Next Page
Loading...
