3-16 ENGINE
OIL PUMP
• Remove the circlip
1 and oil pump driven gear
2.
• Remove the pin
3.
• Remove the oil pump
4.
"
GEARSHIFT
• Remove the gearshift shaft
5.
• Remove the pawl lifter
6 and cam guide
7.
• Remove the gearshift cam driven gear
8.
NOTE:
When removing the cam driven gear
8, do not lose the pawls
9, pins
0 and springs
A.
PRIMARY DRIVE GEAR
• Flatten the lock washer of the primary drive gear nut
B.
Do not attempt to disassemble the oil pump assembly.
To Next Page
Loading...
