3-58 ENGINE
CLUTCH COVER
• Install two dowel pins and new gasket
1.
• Tighten the clutch cover bolts and oil filter cap nut securely.
"
STARTER MOTOR
• Install the starter motor.
NOTE:
Apply grease to the O-ring.
( 99000-25010: SUZUKI SUPER GREASE “A”
.
"
GENERATOR COVER
• Install the starter idle gear
2, shaft and spacer.
• Install the dowel pin and new gasket
3.
• Tighten the generator cover bolts securely.
* Install the new gasket washer to the bolt
A.
* Install the clamp to the bolt
B.
Use a new O-ring to prevent oil leakage.
To Next Page
Loading...
