Sylvania DVR90DE - Priority of Overlapped Timer Settings

Recording
44
When the starting time is same:
A smaller program number PROG. 1 has priority.
When the recording time is partially overlapped:
PROG. 1 will start after PROG. 2 is complete to be recorded.
When the recording time is entirely overlapped:
PROG. 1 will not be recorded.
When the end time of one and the starting time of another are same:
The first 30 minutes of the following one will be cut off.
PROG. 1
PROG. 2
Actual
recording
The first 30 minutes will be cut off.
PROG. 2PROG. 1
PROG. 1
PROG. 2
Actual
recording
PROG. 2
PROG. 1
PROG. 2
Actual
recording
PROG. 2 PROG. 1
PROG. 1
ex.1
PROG. 2
Actual
recording
PROG. 1 PROG. 2
PROG. 1
PROG. 2
Actual
recording
PROG. 1 PROG. 2
PROG. 3
ex. 2
The priority of overlapped setings
The recorder records the programs according to priority if the timer settings overlap. The timer setting set
previously has priority.
If the timer settings overlap, the program that has priority will be recorded. A timer recording of lower pri-
ority will be canceled, start from the middle, or stop on the way.
Check the overlapped timer settings and change the priority if necessary.
DVD-RDVD-RW
E6500UD.QX 03.12.8 19:06 Page 44