Systema EOLO BC RT - Handling of Units with Separate Sections

61
7
SYSTEMA EOLO RT rev. 09ENIT04052021
INSTALLAZIONE
7.1.2 Handling of units with separate sections
Eolo units can be shipped with separate burner and fan sections.
In this case it is possible to move the sections of the unit with the aid of a forklift.
During the unloading and the positioning of the unit, it is absolutely necessary to avoid abrupt or violent maneuvers.
It is mandatory to use a slingbar of adequate capacity adjusted to the width of the unit to ensure stability in
handling by providing suitable spacers to prevent the slings from damaging the unit. Use approved slings of
adequate capacity.
Fig. 7.2 Unit handling
Fig. 7.3 Handling of units with separate sections
Spacer