Systema EOLO BC RT - Packaging; Features; Construction Features

8
2
SYSTEMA EOLO RT rev. 09ENIT04052021
PACKAGING
3.1 CONSTRUCTION FEATURES
EOLO RT expresses the innovative range of high performance roof top hot air generators.
EOLO RT is a heating and ventilation device available for installation outside heated rooms.
EOLO RT is designed for direct distribution or with channels air in the heated space. The channels can be
made of aluminum, steel or elastic fabric.
SYSTEMA ensures great exibility regarding the air ow and the useful head of the appliances. The equip-
ment supplied can contain di󰀨erent grids / air intakes, electrically controlled dampers, mixing chambers, lters,
etc., depending on the installation. The arrangement of the intake systems and air di󰀨users can be congured
as required.
Thanks to the high performance, a sturdy structure, and the use of high quality components, the EOLO RT
devices stand out as superior class products.
The main exchanger is made of galvanized steel, powder coated with epoxy paint. The external panels are
"sandwich" panels, with insulation having a thickness of 5 cm.
REDUCTION OF FUEL CONSUMPTION The modulation of the heat output of the burner (BC version), allows
to supply the thermal power in relation to the climatic conditions present. The advantages that we would obtain
by reducing the power will be a higher combustion e󰀩ciency, lower air statication upwards with consequent
signicant reduction in fuel consumption.
HIGH PERFORMANCES With the use of specially designed VIP premix burners (BC version) for this specic
application, we will obtain high combustion e󰀩ciency, higher than 98% (ref. NVC) on the maximum power and
higher than 108% (ref. NCV) on the minimum power.
LOW EMISSIONS The pollutants emitted into the atmosphere are minimal, in particular the NOX values are
in a minimal percentage.
With the lower fuel consumption, we would obtain less CO2 emissions into the atmosphere.
REDUCED NOISE The use of the new burner VIP makes the generators very quiet.
MODULATING THERMAL POWER (BC version or NBC version with appropriate control panels) The burner
VIP allows you to vary the thermal power emitted in relation to the climatic conditions present or to the needs
of the user.
The power variation can be done manually with the use of a potentiometer housed inside of the generator or
in the control panel, or automatically with the use of the appropriate control panels.
CONDENSATION (BC version) With the minimum heat output equal to 30% of the maximum heat output, the
combustion fumes are condensed with a signicant increase in e󰀩ciency, a decrease in fuel consumption and
a further reduction in noise.
3 FEATURES
2 PACKAGING
The generators are delivered protected in nylon, and with polystyrene corners. The instruction booklet is pla-
ced inside the burner compartment of the generator.
Electrical panels and accessories can be packed together with the generator or separately on another pallet
according to the quantities and dimensions of the shipment.