Systema EOLO BC RT - Installation; Preliminary Unloading Operations; Handling of Monobloc Units

60
7
SYSTEMA EOLO RT rev. 09ENIT04052021
INSTALLAZIONE
7 INSTALLATION
WARNING
Entrust all installation operations to professionally qualied personnel responsible in com-
pliance with the national and local regulations in force in the country where the system is
installed and with the contents of this booklet.
WARNING
During the installation operations, the personnel must be equipped with individual protection
devices in accordance with current legislation.
7.1 PRELIMINARY UNLOADING OPERATIONS
WARNING
Unloading from material handling equipment and transfer to the installation site
must be carried out with means suitable for the arrangement of the load and the weight.
All material lifting and transport operations must be carried out by expert personnel who
are informed about the operating procedures of the intervention and the prevention and pro-
tection rules to be implemented.
The handling of the material must take place according to the procedures described in this
manual.
Make the area of operations inaccessible to strangers by delimiting it with barriers to prevent
its permanence and transit under the loads.
Use suitable lifting and handling equipment complying with the regulations in force, do not
install pulleys for lifting materials and do not place superstructures to reach higher heights.
7.1.1 Handling of monobloc units
Eolo units are equipped with a special prole dedicated to the forklift. Before placing the unit on the structure,
both the two rails and the four transport feet must be removed. (g. 7.1)
Fig. 7.1 Holes for handling
transport feet