TallyGenicom MATRIX PRINTER 2150 - Eject Error; Load Paper from

➲ Eject Error
The printer cannot eject the paper or cannot place the paper in the park
position. Check the following:
Whether the paper path is blocked by a foreign object.
Whether the paper is damaged.
Whether the upper friction is down and clicked into place.
Whether the printhead gap is too small.
BACK
QUIT
?
PRINT
Reference manual Troubleshooting
105
➲ Load paper from …
(toggling with: Online/Offline
and a high whistle tone)
The printer cannot feed in the loaded paper.
Check the following
■ Whether the paper path is blocked by a foreign object.
■ Whether the paper is damaged.
■ Whether the tractors are closed and locked.
■ Whether the paper is too tight or loose.
See page 106 also.
Subsequently, press the
Load key (4).
➲Check ribbon
The ribbon is damaged and blocked.
Replace the ribbon.
Check that the print head carriage moves easily.