➤ Automatic single sheet
feeder, front (ASF-F)
Preparing the printer Switch the printer on. Enter setup mode, select the PapOpt menu option
and activate the ASF-F parameter. Subsequently select the ASF-F either
in setup mode (see chapter
The menu
) or via the paper source quick se-
lection function (see chapter
Settings [I]
,
Paper path quick selection
) or
via an application program.
Activating ASF-F in the PapOpt menu will deactivate both paper
paths Single and Trac2 at the same time and it will no longer be
possible to select them with the paper path quick selection func-
tion. If the ASF-F is deinstalled in the PapOpt menu, the printer will
reactivate the Single paper path automatically, leaving Trac2 deacti-
vated.
BACK
QUIT
?
PRINT
Reference manual Options and Accessories
182
To Next Page
Loading...
