TallyGenicom MATRIX PRINTER 2150 - Page 132

MTPL
IBM
XL24e
IBM
AGM
Epson
LQ-2550
Epson
LQ-2170
Code Function
✓✓
<ESC>?<s><n> Reload a graphics mode
✓✓
<ESC>@ Initialize printer
✓✽✽✽✽
<ESC>[ MTPL start character for programming sequence
✓✽✽✽✽
<ESC>[:y Right justification and centering OFF
✓✽✽✽✽
<ESC>[=z Bold ON
✓✽✽✽✽
<ESC>[>z Bold OFF
✓✽✽✽✽
<ESC>[?1~ MTPL command set
✓✽✽✽✽
<ESC>[?10~ Barcode interpretation OFF
✓✽✽✽✽
<ESC>[?11~ Start barcode interpretation
✓✽✽✽✽
<ESC>[?4~ MTPL + IBM Proprinter-24 command set
✓✽✽✽✽
<ESC>[?50h Selecting character sets with 256 characters
✓✽✽✽✽
<ESC>[?50l Selecting character sets with 94 characters
✓✽ ✽✽
<ESC>[?51h Proportional fonts automatic NLQ and LQ
✓✽ ✽✽
<ESC>[?51l Proportional fonts in draft mode possible (default)
✓✽✽✽✽
<ESC>[?52h Font selection (ESC[10...19m]) possible only for print quality NLQ/ LQ
✓✽✽✽✽
<ESC>[?52l Font selection (ESC[10...19m]) Draft possible (default)
✓✽✽✽✽
<ESC>[?53h Extended character set
✓✽✽✽✽
<ESC>[?53l Standard character set
✓✽✽✽✽
<ESC>[?6~ MTPL + EPSON LQ command set
✓✽✽✽✽
<ESC>[?7h Line overrun = CR + LF
BACK
QUIT
?
PRINT
Reference manual Emulations
122