TallyGenicom MATRIX PRINTER 2150 - List of additional command codes

MTPL
IBM
XL24e
IBM
AGM
Epson
LQ-2550
Epson
LQ-2170
Code Function
✓
<ESC>a<n> Select orientation
✓✓✓
<ESC>A<n> Line spacing n/60 inch
✓
<ESC>A<n> Prepare line spacing n/72 inch
✓
<ESC>b<m><0> Clear all tabs
✓
<ESC>b<m><n><0> Set vertical tabs in channels
✓✓✓✓
<ESC>B<0> Clear all vertical tabs
✓✓
<ESC>B<n1>...<n16><0> Set vertical tabs
✓✓
<ESC>B<n1>...<n64><0> Set vertical tabs
✓
<ESC>c Reset to initialisation status
✓
<ESC>c Setting the horizontal motion index (HMI)
✓✓✓✓
<ESC>C<0><n> Set form length in inches
✓✓✓✓
<ESC>C<n> Set form length in lines
✓✓ ✓
<ESC>d<n1>;<n2> Perform relative horizontal step
✓✓✓✓
<ESC>D<0> Clear all horizontal tabs
✓✓✓✓
<ESC>D<n1>...<n32><0> Set horizontal tabs
✓✓
<ESC><DC2> Condensed printing OFF
✓✓
<ESC><DC4> Double-wide printing OFF (set with <SO> or <ESC><SO>)
✓✓✓✓
<ESC>E Bold ON
✓✓
<ESC><EM>0 Deselect single sheet operation
✓✓
<ESC><EM>1 Bin 1 (front) (option)
BACK
QUIT
?
PRINT
Reference manual Emulations
131