ALGORITHMS
M5ALGOIN
Rev 1.4 Page 18
per octave) Sets the cutoff frequency of
the overall high cut filter in 1/3-octave
steps.
PAGE 4:
DIFFUSE 0 - 25 Simulates the reflections in the room
"hit" a more or less uneven surface. The
DIFFUSE parameter affects the density
of the gated reverb. To set the DIFFUSE
properly, adjust while listening on
percussive type of signals or instruments.
High DIFFUSE settings might add some
release time.
PREDIFF 0 - 100 Adds extra diffusion to the non-linear
reverb. PREDIFF is a mix function
which adds prediffussion from the
selected DIFTYPE.
DIFTYPE
BRIGHT1, BRIGHT2,
WARM, MIDTONE
The patterns used for prediffusion. The
4 types have different 'color'-
characteristics. The prediffusion is
mixed into the reverb by PREDIFF.
WIDTH 0 - 100 % Sets the apparent stereo width of the
algorithm. At '0' the gated reverb will
appear to be coming mainly from the
center (mono compatible), whereas with
WIDTH set to '100' the L/R
reverberators are independent.
To Next Page
Loading...
