3-115
Fig. 3.374
Fig. 3.377
Fig. 3.376
Fig. 3.375
⑤ Remove the pump body half 2 (1).
If the gaskets remain inside the pump body
half 2 (1), move them toward the adapter (2)
side.
⑥ Put the mark “RV2” on the rear cover side
plate (1) at the drive gear (2) side before
removing the side plate (1).
⑦ Put the mark “R2” on the driven gear (1) shaft
end and remove the driven gear (1).
⑧ Holding the adapter side plate (1), remove the
drive gear (2).
To Next Page
Loading...
