TECAN
2006-03 Instructions for Use for sunrise Absorbance Reader No. 30008746 Rev. No. 1.4 3
WARNING
CAREFULLY READ AND FOLLOW THE INSTRUCTIONS PROVIDED IN
THIS PUBLICATION BEFORE OPERATING THE INSTRUMENT.
Notice
Every effort has been made to avoid errors in text and diagrams; however, Tecan
Austria GmbH assumes no responsibility for any errors, which may appear in this
publication.
It is the policy of Tecan Austria GmbH to improve products as new techniques
and components become available. Tecan Austria GmbH therefore reserves the
right to change specifications at any time with appropriate verification, validation,
and approvals.
We would appreciate any comments on this publication.
Manufacturer
Tecan Austria GmbH
Untersbergstraße 1A
A-5082 Grödig/Salzburg
AUSTRIA / EUROPE
Telephone: 0043 (0)6246/8933
FAX: 0043 (0) 6246/72770
E-mail: office.austria@tecan.com
Copyright Information
The contents of this publication are the property of Tecan Austria GmbH and are
not to be copied, reproduced or transferred to another person or persons without
prior written permission.
Copyright © Tecan Austria GmbH
All rights reserved.
Printed in Austria.
Declaration for EU Certificate
Provided upon request where appropriate.
sunrise Absorbance Reader Intended Use
See chapter 2.2.1 Intended Use.
About the Instructions For Use
This publication is intended as Instructions for Use for the sunrise Absorbance
Reader, which is designed to measure the light absorbance (optical density) of
samples in 96 well microplates. It is intended as reference and instruction for the
user.
This document instructs how to:
• Install the instrument
• Clean and maintain the instrument
Warranty
3 Year Warranty
As an expert for microplate instrumentation Tecan proves its commitment to
quality and offers a unique 3 year warranty for your
sunrise Absorbance Reader
as a standard. Warranty will be invalid if the instrument is opened or modified.
To Next Page
Loading...
